AEB3000 – 3-4 CYLINDERS ECU FOR DIRECT INJECTION VEHICLES

Description

Multipoint sequential injection control unit 3-4 cylinders for direct injection petrol engines.

Tech. Specifications

Supply voltage: Vbatt=10÷16V.
Operating temperature: -40÷120°C
Current absorption with the actuators disabled: Imax=0.5A
Current absorption in standby mode: Istandby <5uA
Actuators managed:

  • 3 or 4 gas injectors with the following characteristics Imax=6, Vbatt,max=16V
  • 2 power outputs for gas solenoid valves
    * Pmax=25W, Imax=2A (power and maximum current for each output with two outputs enabled)
    * Pmax=50W, Imax=4A (power and maximum current with just one output enabled)

Sensors managed:

  • Gas Pressure Sensor: AEB025, 463500000, 463059000, 463505000
  • MAP sensor: AEB025, 463500000, 463059000, 463505000, car original sensor
  • Level sensor: AEB level sensor, standard sensor 0-90Ohm, non-standard sensor
  • Reduction gear temperature sensor: AEB sensor type 369
  • Gas temperature sensor: sensor type AEB (4.7kOhm), sensor (2.2kOhm), sensor 1kOhm
  • Pre-catalytic converter Oxygen sensor: 0-1V, 0-5V, 5-0V, 0.8-1.6V, 2.5-3.5V, UEGO (linear current sensor)
  • Post-catalytic converter Oxygen sensor: 0-1V

Management of AEB119B type switch.

Certifications

2006/28/CE 10R-03 67R-01 110R-00

Package contents

control unit
Gas temperature pressure integrated sensor
switch with push button
harness
bag of accessories

Documentations